OPERATING YOUR EVERYTHING
PRESSURE COOKER
The cooking times in pressure recipes refer to the time cooked under full operating
pressure, not the preheating time it takes to reach pressure. Your Everything Pressure
Cooker has a microchip that automatically detects when the Everything Pressure Cooker
has reached operating pressure and will start the countdown timer automatically. This
eliminates guesswork in determining how long to preheat your cooker since this preheat
time is determined by volume and food type being cooked.
Follow instructions in the Preparing Your Everything Pressure Cooker section of
this manual.
When the Everything Pressure Cooker is first plugged in you will see four zeros
[0000] on the Digital Display indicating you are in standby mode.
Press the desired function button (see Cooking Functions section of this manual for
default settings for each function).
The blue indicator lights for the selected function and the pressure settings of Low
or High will begin flashing and the Display will show the default cooking time. Press
the Adjust button to change the pressure setting between Low or High while the
lights are still blinking.
To change the Default time, press the selected function button successively and the
time will scroll up. Hold the function button in to scroll at a faster rate. Once your
cooking settings are complete the Everything Pressure Cooker will begin the Preheat
cycle within 10 seconds of the last button press. The Everything Pressure Cooker will
let you know it is in Preheat mode by flashing the first two digits of the Time Display.
Once full pressure has been reached the first two digits of the Timer Display will stop
flashing and the countdown timer will start.
NOTE:
Once the preheat cycle has started you cannot change the Pressure Level or the
Cooking Function. If you need to change either of these settings press the Keep Warm/
Cancel button and enter your new settings. The timer can be changed at any time.
When the set time has elapsed the Everything Pressure Cooker will automatically
switch to Keep Warm. Refer to the recipe to determine which release method you
should use at the end of the cooking cycle and the section Safety First – How to Open
Your Lid.
Follow instructions in the Preparing Your Everything Pressure Cooker section of
this manual.
When the Everything Pressure Cooker is first plugged in you will see four zeros
[0000] on the Digital Display indicating you are in standby mode.
Press the Slow Cook function, (see Cooking Functions section of this manual for
default settings).
Manual • Rice • Multigrain • Meat/Stew • Poultry • Soup/Stock • Steam •
Bean/Chili • Cereal
1.
2.
3.
4.
5.
6.
1.
2.
3.
PRESSURE COOKING (PRESSURE VALVE POSITION: SEAL)
SLOW COOK (PRESSURE VALVE POSITION: VENT)
OPERATING YOUR EVERYTHING
PRESSURE COOKER (CONT.)
Only use the Sauté/Sear Function with the Lid off. Never place the Lid on the cooker,
even partially, to avoid building pressure up in the cooker.
Follow instructions in the Preparing Your Everything Pressure Cooker section of
this manual.
When the Everything Pressure Cooker is first plugged in you will see four zeros
[0000] on the Digital Display indicating you are in standby mode.
Press the Sauté/Sear function (see Cooking Functions section of this manual for
default settings).
The blue indicator lights for the selected function and the temperature settings of
Low or High will begin flashing and the Display will show the default cooking time.
Press the Adjust button to change the temperature settings between Low or High
while the lights are still blinking.
To change the Default time, press the selected function button successively and the
time will scroll up. Hold the function button in to scroll at a faster rate. Once your
cooking settings are complete the Everything Pressure Cooker will begin the Sauté/
Sear cycle within 10 seconds of the last button press. The Timer Display will start the
countdown timer. Wait 5 minutes to allow the Pot to preheat. You can change the
time during the cooking function but do not exceed 30 minutes of continuous use of
this function to avoid damaging the cooker.
NOTE:
Once countdown timer has started you cannot change the Cooking Function
or the temperature setting. If you need to change either of these settings press the
Keep Warm/Cancel button and enter your new settings.
When the set time has elapsed the Everything Pressure Cooker will go back to
standby mode.
The blue indicator lights for the selected function and the temperature settings of
Low or High will begin flashing and the Display will show the default cooking time.
Press the Adjust button to change the temperature settings between Low or High
while the lights are still blinking.
To change the Default time, press the selected function button successively and
the time will scroll up. Hold the function button in to scroll at a faster rate. Once
cooking settings are complete the Everything Pressure Cooker will begin the Slow
Cook cycle within 10 seconds of the last button press. The Timer Display will start
the countdown timer.
NOTE:
Once countdown timer has started you cannot change the Cooking Function
or the temperature setting. If you need to change either of these settings press the
Keep Warm/Cancel button and enter your new settings.
When the set time has elapsed the Everything Pressure Cooker will automatically
switch to Keep Warm. Refer to the section Safety First – How to Safely Open
Your Lid.
1.
2.
3.
4.
5.
6.
7.
8.
4.
5.
6.
SAUTÉ/SEAR (PRESSURE VALVE POSITION: N/A -
DO NOT USE LID
)
10
11
