Martello STILISTA LATTELUX, Instruction Manual, Page: 17 / 24

Stilista LATTELUX 17
No function
Make sure the power cord is properly inserted into the unit and wall
outlet and the On/Off button (N) on the left of the machine is tuned “on”.
The indicator light will illuminate,
but espresso does not flow.
The espresso dispensing nozzle (M) is clogged. To clean,
follow the instructions in the cleaning section.
The loaded espresso capsule can be damaged. Wait for a short period
of time, before opening the lever and then try with a new capsule.
Make sure, that lever (A) is closed.
The capsule container may be full and should be removed from the unit
for at least 5 seconds to reset the counter and emtpy the used capsules.
Water under the machine
Make sure that the water tank (L) is installed correctly.
CAUTION: When refilling the water tank (L), always turn off the
power, and then remove the tank and fill it. Otherwise water
will leak from the back of the unit.
The espresso machine is whistling
softly.
This is not a fault, but normal setting of the pressure control valve.
Produced little or no Crema.
Coffee has natural occurring oils which may clog the espresso nozzle.
To clean, regularly run a brew cycle with water only.
The water does not flow through
the espresso dispensing nozzle (M). Coffee has natural occurring oils which may clog the espresso nozzle.
To clean, regularly run a brew cycle with water only.
The brew button (C+D+E) starts
flashing for a long time. When is the
espresso machine ready for use?
The espresso machine takes approximately 30 seconds to heat up.
The espresso capsule does not fall
automatically into the capsule cont-
ainer (I), when I open the lever (A).
The capsule container (I) may be full. Please empty
it or make sure the capsule lever is fully open.
The espresso capsule does not
insert correctly.
The capsule container (I) may be full. Please empty
it or make sure the capsule lever is fully open.
Machine beeps and all brew
buttons (C, D & E) lights are flashing. Missing water tank (L) or no water is in the water tank (L). Make sure the
water tank is properly inserted and filled to a minimum of 100 ml.
EN
TROUBLE SHOOTING