background image

General Information

 

General Information and Safety Instructions

local, state and national electrical codes. Any alterations or additions to building wiring must be completed by a licensed 

breaker, to ensure all pole isolation of the electrical supply.

This is not a DIY product.

This is an outdoor domestic product and should not be used for commercial, trade or industrial purposes.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, 

or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the 

appliance by a person responsible for their safety.

Application

This product is intended for outdoor use.

Important Note

The important safeguards and instructions given in this manual are not meant to cover all possible conditions and situations 

that may occur. It must be understood that common sense, caution and care are factors which cannot be built into any 

product. The persons caring for and using the unit must supply these factors.

Compliance

AS/NZS 60598.2.1:2014 & AS/NZS 60598.1:2013 Luminaires – Particular requirements – Fixed general purpose luminaires.
AS/NZS 61347.2.11:2003 Lamp control gear - Particular requirements for miscellaneous electronic circuits used with luminaires.
IEC 82079-1 : 2012 Standards. Preparation of instructions for use – Structuring content and presentation - part1: general principles and   

detailed requirements.
AS/NZS CISPR 15: 2011 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment.

Congratulations on choosing to buy a Martec product.
All products brought to you by Martec are manufactured to the highest standards

 

of 

performance and safety, and, as part of our philosophy of customer service and 

satisfaction, are backed by our 

 

warranty .

We hope you will enjoy using your purchase for many years to come.

www.martecaustralia.com.au | 02 8778 7500 | [email protected]

Page 4

THIS LED BUNKER LIGHT SENSOR MUST BE INSTALLED BY A QUALIFIED ELECTRICIAN, AND AN
ELECTRICAL SAFETY CERTIFICATE MUST BE ISSUED ON COMPLETION OF THE INSTALLATION.

you feel you are quite familiar with this product. Keep this document in a safe place for future reference.

bunker light

Reviews: