E: [email protected] | P: 02 8778 7500
www.martecaustralia.com.au
E L I T E A C S e r i e s I n s t a l l a t i o n G u i d e
Thanks for choosing our Elite AC Series ceiling fan.
We strongly recommend that you read this manual carefully before installation.
Models Parameters (Fan Only):-
MEF133MM
1220mm 3 Blade Ceiling Fan Matt Black
MEF133WW
1220mm 3 Blade Ceiling Fan Matt White
MEF133WO
1220mm 3 Blade Ceiling Fan Matt White/Oak
MEF133MB
1220mm 3 Blade Ceiling Fan Matt Black/Bamboo
MEF133BB
1220mm 3 Blade Ceiling Fan Brushed Nickel/Bamboo
MEF133OM
1220mm 3 Blade Ceiling Fan Old Bronze/Merbau
MEF133BS
1220mm 3 Blade Ceiling Fan Brushed Nickel/Silver
Models Parameters (Fan and LED Light):-
MEF1333MM
1220mm 3 Blade Ceiling Fan Matt Black with 24W Tricolour LED Light
MEF1333WW
1220mm 3 Blade Ceiling Fan Matt White with 24W Tricolour LED Light
MEF1333WO
1220mm 3 Blade Ceiling Fan Matt White/Oak with 24W Tricolour LED Light
MEF1333MB
1220mm 3 Blade Ceiling Fan Matt Black/Bamboo with 24W Tricolour LED Light
MEF1333BB
1220mm 3 Blade Ceiling Fan Brushed Nickel/Bamboo with 24W Tricolour LED Light
MEF1333OM
1220mm 3 Blade Ceiling Fan Old Bronze/Merbau with 24W Tricolour LED Light
MEF1333BS
1220mm 3 Blade Ceiling Fan Brushed Nickel/Silver with 24W Tricolour LED Light
Part List:
Qty 1x motor assembly
Qty 1x instruction manual
Qty 1x screw kit
Qty 1x balancing kit
Qty 1x hanging bracket
Qty 1x wall control kit
Qty 3x blades
Application
Flat Surface / Ceiling
Slope Ceiling up to 15°
Corrugated Ceiling
Apex Ceiling
How to Assemble
Secure the hanger bracket
to ceiling beam or a suitable
piece of timber inserted
between the ceiling beams
using the two long screws
supplied with the package.
(See Fg.1)
Place circular shockproof
gasket above the hanger
bracket. Align the bracket
and screw the hanger
bracket to the ceiling tightly.
(See Fg.2)
Place fan into hanger
bracket and align Ball Joint
Slot with hanger bracket as
illustrated.(See Fg.3)
After wiring is completed,
attach the canopy to the
hanger bracket by pushing
upwards and twisting anti-
clockwise. Tighten screws
and ensure canopy is not
touching the ball joint.
(See Fg.4)
Fg.1
Fg.2
Fg.3
Fg.4
