Marta MT-1883, User Manual

Page: 9 / 17

9
ENG USER MANUAL
IMPORTANT SAFEGUARDS

Read this manual carefully before using the appliance and save it for future reference.

Before the first use, check the device specifications and the power supply in your network.

Do not use the multi-purpose socket used in conjunction with other electrical appliances.

Use only for domestic purposes according to the instruction manual. It is not intended for industrial use.

For indoor use only.

Do not use with damaged cord, plug or other injuries.

Keep the power cord away from sharp edges and hot surfaces.

Do not pull the cord. Always take the socket. Do not reel the cord around the device housing.

Never attempt to dissemble and repair the item by yourself. If you encounter problems, please contact the nearest customer service center.

Using accessories or replacement parts that are not recommended or sold by the manufacturer may cause damage to the item.

Always unplug the item and let it cool down before cleaning and removing parts. Keep unplugged when not in use.

To avoid electric shock and fire, do not immerse in water or other liquids. If this occurs, immediately unplug it and contact service center for inspection.

Do not place drying trays containing products dripping with water on the heat-and ventilation unit.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.

This product is a wind circulation heating products, at the bottom of the work in products, products are forbidden to have any foreign body of inlets can jam products, otherwise it will cause the
product direct damage or danger.

It is strictly prohibited to mobile products in the product work. It is forbidden to keep out cover ventilation products work.

Use and store the drier away from sources of heat (e.g. kitchen stove). It is forbidden to expose the drier to temperature higher than 90°С.

Before disconnecting the dryer from the power supply, turn it off by pressing and holding ON/TIME

Do not work with the appliance longer than 48 hours running.
IT IS NECESSARY to put heat-resistant material under the appliance during using it or put the appliance onto the heat-resistant surface.
BEFORE FIRST USE
Wash the drying trays and the lid in warm soapy water.
Clean the heating and ventilation with a damp cloth and wipe dry.
Dry all parts thoroughly after cleaning.
USING THE APPLIANCE
1. Put the prepared in advance products to a removable sections. Sections for products should be placed in such way to let the air circulate freely between them. That is why you should not put too many
products to the sections and put the products on to each other.
2. Put the sections on to a power base.
3. Put the upper lid on the appliance. During drying the upper lid should always be on the appliance.
4. Insert the plug of the power cord and press the POWER button. The display will show "0000"
5. Press «+» и «-» buttons to set working time. Maximum working time - 48 hours.
6. To adjust temperature press SET button. The display will show TEMP. Press «+» и «-» buttons to set temperature. One push of «+» и «-» buttons adds 5°С. Temperature can be set up from 40°С
to 70°С.
7. After setting temperature, the dryer will start working. To adjust temperature during operation press SET and «+» и «-» buttons.