Marta MT-1710, User Manual

Page: 6 / 30

6

Operating appliance always needs supervision. Bread inside could inflame!

Don‟t touch appliance heating element. You could get burnt!

Don‟t place into the toaster slots spread with butter or jam bread.

Don‟t insert bread that is too large for the toaster.
 If bread stuck in the toaster, unplug the appliance. When the toaster cool down, take the bread out.

Never take bread out with sharp utensils. They could damage heating element.

Don‟t extract bread while the toaster is in use.

Operating lever should be in top position when you unplug the appliance.

Use toaster only with crumb tray. Clean crumb tray regularly.
BEFORE FIRST USE
 Please unpack your appliance. Remove all packing materials. Remove all stickers.

Heat the toaster at maximum setting two times without bread in order to eliminate residual odour. As all new electric heating elements, a toaster creates a new smell when it is first time
switched on. This is quite normal and not a cause for concern.
 The appliance is ready for use.
USING THE TOASTER

Make sure that operating lever is in top position. Plug the toaster to the power supply.

Choose required toasting level – from 1 to 6.

1-2 – light toasting or warm up

3-4 – medium toasting
 5-6 – maximum level of browning.

Place bread into the bread slots. Please mind that thin slices are easier to be browned

Press down the operating lever. The toaster will start running automatically and light indicator will go on.

Bread slices will be ejected out and the appliance will shut down automatically when toasting is finished.

Let the toaster cool down 15-20 seconds before next use.

CANCEL FUNCTION Toasting could be cancelled anytime during toasting by pressing “CANCEL” button. Indicator light will shut down.

Before toaster unplugging make sure that operating lever is in top position.
CLEANING AND MAINTENANCE

Always unplug the appliance before cleaning.

Let the appliance cool down completely.

Pull the crumb tray out, empty it and place back.
 Clean the appliance housing if required, using soft material.

Do not use chemical and abrasive cleaners.

Keep the appliance in a dry cool place.
SPECIFICATION