-
5
-
-
6
-
CHARGING THE BATTERY
To scan a barcode, make sure the aiming beam crosses
every bar and space of the barcode.
1. Flip open the micro USB port on the scanner.
2. Insert the micro USB connector into the port on the
scanner and USB A connector into a USB port on
the host PC.
BEEPER INDICATION
LED INDICATION
Single long beep
Power up
Single beep Good read
Single short beep
The scanner reads a Code39 of
ASCII in configuration procedure
Two beeps
Wireless connection
Two short beeps The scanner successfully reads
a configuration barcode
Five beeps
Low power
Three beeps Wireless disconnection
Three short beeps i. The scanner reads a barcodes
while disconnected.
ii. Th
e scanner reads an unexpected
barcode during configuration
procedure. (scan [ABORT] to abort
and start over)
Several short beeps The scanner switches from one
communication mode to another
Off
Flashing Blue
Blue for 2 sec
Flashing Red
Solid Red
Standby or Power off
Disconnected or Discoverable
Good Read
Low power
Charging
Scanner
Micro USB
USB A
Host
GETTING STARTED
