background image

 3 of 11 

WS1694
11-2018/Rev.C

104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127  •  Fax 800-477-6341 / 641-753-6341 www.

MARSHALLTOWN

.com

SAFETY PRECAUTIONS

IMPORTANT—READ THIS MANUAL BEFORE ASSEMBLING OR OPERATING
After referring to the operation manual, if you still require assistance, please contact our customer 
service department.

This operator’s manual has been prepared to provide the information you need to correctly operate and 
maintain your unit. Read it carefully and keep it for future reference.

The replacement of any part on this product by other than the manufacturer’s authorized replacement part may adversely 
affect the performance, durability or safety of this product. Should you ever require repair parts or service, contact your 
authorized parts and service dealer.

The manufacturer reserves the right to make changes or add improvements to its product at any time without prior notice. 
The manufacturer also reserves the right to decide, upon its discretion at any time, to discontinue a product.

Read and follow all safety precautions and operating instructions in this manual. 

CAUTION!

Familiarity and proper training are required for the safe operation of this equipment. Equipment operated improperly or by 
untrained personnel can damage equipment or cause bodily harm. Read the operating instructions contained in this manual 
to familiarize yourself with the location and proper use of all the controls.

•  DO NOT operate this machine until you have read the operating and safety instructions. ALWAYS operate the machine 

 

in accordance with the manufacturer’s instructions.

•  ALWAYS inspect your roller screed upon arrival for damage or tampering that can rarely occur during shipping. If  

 

damage is found, file a claim with your carrier immediately! Mark corresponding delivery receipt as “damaged  

 shipment”.

  NEVER allow untrained personnel to operate your roller screed. Individuals who operate this screed should have 

  adequate training in operating procedures.

•  NEVER use over-the-counter hardware to replace manufacturers’ hardware. Contact MARSHALLTOWN Customer  

 

Service Department for information regarding replacement parts. 800-888-0127

  DO NOT attempt to clean or service screed while machine is running.
  DO NOT use gasoline, other fuels, or any flammable solvent to clean parts, especially in enclosed areas. Fumes from 

  fuels and solvents can cause serious health problems if you are exposed to them over an extended period of time.

•  ALWAYS disconnect power to the motor before servicing or cleaning the roller screed to prevent accidental start-up.

  ALWAYS wear adequate hearing protection while running your roller screed.

•  Refer to the included motor manufacturer’s manual for specific electrical requirements and safety information.

CAUTION!

CAUTION!

CAUTION!

DANGER!

Summary of Contents for RS14












Reviews: