Marshall Electronics
27
5. Press
[ENTER]
to activate.
6. Press [
] or [
] to select
[Off / On]
.
7. Press
[MENU]
to exit.
6.5 Saving the current lens position data
8. Press
[ ID]
on the
remote control
to save the current position data.
ID shall be a digit [0 ~ 9].
Use VISCA command to store position data to [0 ~ 127]
6.6 Clearing the saved position data
1. Press
[Reset + ID]
on the
remote control
to clear the given position data.
ID shall be a digit [0 ~ 9].
Use VISCA command to clear position data stored in [0 ~ 127]
6.7 Turning on the back light compensation function
1. Press
[Back Light]
on the
remote control
to turn on or turn off the back light
compensation
[Note] Enabled only when the Exposure Mode is set to
Full Auto
.
6.8 Adjusting the shooting angle of the lens
1. Press
[Tilt
]
or
[Tilt
]
on the
remote control
to adjust the angle upward or
downward.
2. Press
[Pan
]
or
[Pan
]
on the
remote control
to adjust the angle to right or
left.
3. Press
[Pan - Tilt Reset]
on the
remote control
to reset the angle to the center
point.
6.9 Zooming in/out images
6.9.1 Adjust image size
1. Press
[Fast +]
on the
remote control
to zoom in images.
2. Press
[Fast -]
on the
remote control
to zoom out images.
6.9.2 Fine-tune image size