Marshall Electronics AR-DM1 Operating Instructions Manual Download Page 15 | Manualshive

Page: 15 / 20

background image

Module Installation

Input / Output Module Installation

The ARDM-series input and output modules are designed for simple installation and removal without tools. Use the
following instructions to install a module:

1. Ensure that the audio monitor is powered off.

Modules cannot be installed or “hot swapped” while the audio monitor

is powered on.

2. Remove the blank cover if present over the empty slot using a Philips screwdriver with appropriate head size.

3. Carefully slide the module into the open slot, aligning the side edges of the module with the guides inside the

monitor. Push the module all the way in until it locks into place.

4. Tighten the two thumbscrews on the face of the module.

Note:

Avoid touching components inside the module to prevent static discharge

THUMB SCREWS

EMPTY SLOT

COVER

«
...
13
14
15
16
17
...
»

Summary of Contents for AR-DM1





















Reviews:

No comments

Related manuals for AR-DM1

Brand: Dahua Pages: 22

Brand: Gato Audio Pages: 12

CONCORD Express

Brand: GE Interlogix Pages: 32

Brand: iHome Pages: 3

Brand: iHome Pages: 2

Brand: iHome Pages: 17

Brand: Vandersteen Audio Pages: 12

Brand: iHome Pages: 1

Brand: jablotron Pages: 2

Brand: jablotron Pages: 24

Brand: VDO Pages: 2

Brand: Electro-Voice Pages: 2

Brand: Bticino Pages: 2

Brand: Nibe Pages: 16

Component Speaker XTR52

Brand: Orion Pages: 31

Brand: Valcom Pages: 13

Brand: SELTECH Pages: 14

Caddy Tig 1500i VRD

Brand: ESAB Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands