Marshall Amplification Vinyl Jukebox 3 Series, User Manual

Page: 9 / 37

9
The Jukebox player mechanism will be locked into position by 4 wing nuts that are
located under the play deck. These must be loosened before initial operation. The
loosening of the wingnuts allows the mechanism to float freely and dampen any
vibrations which may effect the vinyl playback.
How to locate and loosen the retaining bolt wingnuts
• Unlock and remove the rear cabinet door (shown in FIG1)
• Locate the retaining bolts and wingnuts. Two are located at the front of the
mechanism and two at the rear as shown in FIG3.
• Carefully loosen the wingnuts on the retaining bolts, allowing them to rest on
the rubber grommets as shown in FIG4.
• Once the wingnuts have been removed, close
the front door of the Jukebox.
• Power on the Jukebox. The location of the
mains power switch is shown in FIG1.
The Jukebox will show “TRANSIT.”
• At the rear of the Jukebox press the RESET button once. The location of this
button is shown in FIG1.
The Jukebox mechanism will rotate to its playing position. The display will no
longer show “TRANSIT.”
The Jukebox is now ready for operation.