Marshall Amplification Vinyl Jukebox 3 Series, User Manual

Page: 34 / 37

34
Bluetooth
The Jukebox allows audio streaming via Bluetooth.
To pair an audio device to the Jukebox.
• Press the BT PAIR button on the Jukebox remote control.
• “BT ON” will show on the Jukebox display.
• Turn on the Bluetooth connection on your audio device and begin searching
for devices (refer to your audio device manual for instruction on how to
search and pair to a device).
• The Jukebox will show as the name “SoundleisureJB”
• The pairing procedure is only required on the first connection. Once your
device is paired, it is possible to reconnect by selecting “SoundleisureJB”
from your devices paired list. It is not necessery to press the BT PAIR button
again.
• The Jukebox can remember up to 8 paired devices. (Although only one can
be playing at a time)
Important Bluetooth Information
Jukebox contains transmitter module FCC ID : T9J-RN52
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into a mains outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.