21. Chorus Rate
Controls the speed of modulation of the chorus
effect.
22. Chorus on/off Switch
Provides manual push switch selection for the
chorus. May also be operated by footswitch
connected to the rear panel jack socket. Set the
front panel switch to the in position for the
footswitch to function (Marshall footswitch P803
included).
23. Master Volume
Controls the overall volume level of the combo.
MASTER SECTION
(8280 & 8200)
The 8280 and 8200 have identical features up to
item 14, then as follows:
15. Effects level switch
Selects the level to match your external effects
units (0dB for rack units and -20dB for pedals).
16. Effects Mix
For mixing the effects to dry signal.
17. Master Reverb
Controls the level of reverb effect on all channel
selections.
18. Master Volume
Controls the overall volume level of the unit.
19. Chorus on/off Switch
Provides manual push switch selection for the
chorus. May also be operated by footswitch
connected to the rear panel jack socket. Set the
front panel switch to the in position for the
footswitch to function (Marshall footswitch P803
included).
20. Mode Select Switch (A/B)
Manually switches from mode A, flange type
chorus, to Mode B, traditional chorus.
21. Chorus Rate (Normal)
Controls the speed of modulation of the chorus
effect on the normal channel.
22. Chorus Depth (Normal)
Controls the modulation depth of the built in
chorus effect on the normal channel.
23. Chorus Rate (Boost)
Controls the speed of modulation of the chorus
effect on the boost channel.
24. Chorus Depth (Boost)
Controls the modulation depth of the built in
chorus effect on the boost channel.
REAR PANEL
(8280 & 8200 only)
25. Mains Input
26 & 27. Speaker Outputs
Two parallel wired sockets for connection to
external speaker cabinet/cabinets from right hand
side of power amp. Note - the combined total
impedance of speaker cabinets should not be less
than 4 Ohms.
28 & 29. Speaker Outputs
Two parallel wired sockets for connection to
external speaker cabinet/cabinets from left hand
side of power amp. Note - the combined total
impedance of speaker cabinets should not be less
than 4 Ohms.
30. Line Out Jack
Filtered low level right hand signal ideal for direct
connection to recording or mixing desks.
31. Line Out Jack
Filtered low level left hand signal, ideal for direct
connection to recording or mixing desks.
32. Footswitch Jack
For connection of the supplied two way footswitch
for channel switching and chorus on/off functions.
(Marshall footswitch P803 included).
33. Parallel Stereo Loop Right Return
For connection to one side of the power amp from
the output jack of an external stereo effects
processor.
34. Parallel Stereo Loop Left Return
For connection to the other side of the power amp
from the output jack of an external stereo effects
processor.
35. Parallel Stereo Loop Send Jack
For linking in stereo to the input jack of an
external stereo effects processor.
36. Series Mono Loop Return Jack.
For connection from the output jack of an external
mono effects processor.
37. Series Mono Loop Send Jack
For linking to the input jack of a mono external
effects processor.
REAR PANEL (8100 only)
The rear panel features the mains input socket plus
two parallel wired sockets for the connection of
loudspeaker systems, the combined total
impedance of which should not be less than 4
Ohms, eg; two 8 Ohms cabinets in parallel. The
purpose built cabinet for the 8100 is the 140 Watt
compact 4x12 model 8412.
6
VALVESTATE HANDBOOK ART english 1/11/04 10:23 am Page 6
