32
Dimensions
5
Installation and Initial Setup
■
Unpacking
Carefully unpack the V-MD241 monitor and verify that the following items are included:
• V-MD241 Monitor
• V-PS12-5A-XLR Power Supply
• Operating Instructions
Inspect the unit for any physical damage that may have occurred during shipping. Should there be any damage, immediately
contact Marshall Electronics at (800) 800-6608. If you are not located within the continental United States, call +1 (310) 333-
0606.
■
Installation
A VESA standard 200/75mm hole pattern also allows custom mounting installations. Alternately, the V-MD241 can be used in a
desktop configuration with optional stand. Please contact Marshall Electronics for more information.
Warning:
Please use only the square type VESA mount (which fits inside the VESA Screw Length WARNING
silkscreen) with the 200/75mm hole pattern in order to avoid obstructing Module Slot 2.
Please contact Marshall Electronics or visit
www.LCDRACKS.com
for further information.
■
Connections, Power-On and Initial Setup
Plug the power supply into an AC power source (100-240 V @ 50/60 Hz). Attach the Power connector to the back of the monitor.
Connect the required cables for video signal input and output. (Power must be applied to the V-MD241 for the active loop-
though output to be activated.) The monitor defaults to ‘ON’ when power is supplied. Video will automatically be detected and
displayed on the screen.
