Marshall Amplification ROCKET LP, User Manual

Page: 32 / 40

32
Troubleshooting and error codes
Great care has been taken to ensure your discs are protected whilst in the
Jukebox. The mechanism carries out numerous checks to ensure it is running
correctly. In the unlikely event of an error the mechanism will freeze position
and one of the following error codes will be displayed on the LED.
General errors are as follows :
1.0 : PSU module not detected
2.0 : Display module not detected
3.0 : Amp module not detected
4.0 : Mech module not detected
5.0 : Lighting module not detected
Mechanism error codes as follows :
4.01 : Low Voltage
4.02 : EEPROM Read/Write
4.03 : Vertical Motor
4.04 : Horizontal Motor
4.05 : Turn Table Error
4.06 : Flip Error
4.07 : Tone Arm Error
4.08 : Record on Turntable
4.09 : Over Temperature
How to clear an Error Code.
• Open the front glass of the Jukebox.
• Remove any jammed records from the mechanism.
• Press the reject button located on the rear of the machine (see FIG 1)
• Close the front glass of the Jukebox
• The mechanism will then re-synchronise and resume normal operation.
IF YOU ARE UNSURE HOW TO PROCEED PLEASE CALL SOUND LEISURE :
Email : CDTech@soundleisure.com
Tel : +44 (0) 113 232 1700