1
Be sure to take extra care to Protect Lens of unit prior to and during installation, and during service. Suspension packaging box is a handy
platform to protect lens and enclosure, while installing camera and accessory electronics before installation. Failure to protect lens will
adversely affect product perform
Hardware Pack Provided with CV6XX-HFH Housing
Camera mount stand offs can be adjusted to any height from 0” to 3.75” using assembly logic illustrated above right. By utilizing both the camera
mounts inside the CV6XX-HFH; the
upper
mounts, and the
lower
mounts around the lens on hinged lower of CV6XX-HFH, virtually any PTZ or Mini-
Dome Camera can be mounted into the enclosure at any level.
Stand Off Height Assembly Table
for Camera Height Adjustment
2
Site Power Available
110 – 220 VAC
Power Source – Single Phase Only
24 VAC/VDC
Step Down Transformer
High Voltage to 24 VAC
Site Power Available
MVP Voltage Matrix: Enclosure Input – Camera Output
Input Voltage to Enclosure
The MVP Enclosures can be powered by
Inputs
of either High Voltage
110-220 VAC
. Or Low Volt
24 VAC/ VDC
Or
Output Voltage to Power Camera
MVP provides step down voltage to supply camera power for 12VDC, and 24V Cameras. 24V Camera Supply
24V output depends on Site Power Input, for either 24V Direct Current, or Alternating Current (see table above)
Voltage Matrix for Input / Output
*Optional 24VAC Transformer Module available
for 24VAC only cameras to convert 110-220 VAC to 24 VAC (sold separately)
Power Chassis integrated
into D-Series MVP
2
Site Power Available
110 – 220 VAC
Power Source – Single Phase Only
24 VAC/VDC
Step Down Transformer
High Voltage to 24 VAC
Site Power Available
MVP Voltage Matrix: Enclosure Input – Camera Output
Input Voltage to Enclosure
The MVP Enclosures can be powered by
Inputs
of either High Voltage
110-220 VAC
. Or Low Volt
24 VAC/ VDC
Or
Output Voltage to Power Camera
MVP provides step down voltage to supply camera power for 12VDC, and 24V Cameras. 24V Camera Supply
24V output depends on Site Power Input, for either 24V Direct Current, or Alternating Current (see table above)
Voltage Matrix for Input / Output
*Optional 24VAC Transformer Module available
for 24VAC only cameras to convert 110-220 VAC to 24 VAC (sold separately)
Power Chassis integrated
into D-Series MVP
CV6XX-HFH Manual
www.marshall-usa.com
3
4
