5
1080 HD-SDI 5X Camera
Select WB CONTROL using the UP or DOWN button.
You can change between AWB, ATW, PUSH, INDOOR, OUTDOOR, and MANUAL using
the LEFT or RIGHT button.
AWB:
Controls the automatic adjustment of the light source's color
temperature to 3,000°K ~ 8,000°K.
WB CONTROL
AWB, ATW, PUSH,
INDOOR, OUTDOOR, MANUAL
ATW:
Continuously adjusts camera color balance in accordance with any
change in color temperature. Compensates for color temperature changes
within the range of 1,900°K to 11,000°K.
INDOOR:
Select this when the color temperature is between 4,500°K and 8,500°K.
PUSH:
Color temperature will be manually adjusted by pushing the OSD
button. Place the white paper in front of the camera when OSD button is
pressed to obtain the optimum result.
MANUAL:
Select this to fine-tune White Balance manually.
OUTDOOR:
Select this when the color temperature is between 1,700°K and
11,000°K (Ex. Sodium light inclusion)
MAIN MENU
WB CONTROL
AE CONTROL
FOCUS CONTROL
BACK LIGHT
IMAGE CONTROL
DISPLAY CONTROL
RESET
EXIT
ATW
INDOOR
SAVE
You can adjust the blue and red tone level manually.
BLUE:
Adjust the blue tone of the image. (0~31)
RED:
Adjust the red tone of the image. (0~31)
WB CONTROL
BLUE IIIIIIIIIIIII31
RED IIIIIIIIIIIII31
RETURN
■ Set White Balance first by using the ATW or AWB mode. After that switch to MANUAL mode,
■ White Balance may not work properly under the following conditions. In this case, select the AWC mode.
- When the ambient illumination of the subject is dim.
- If the camera is directed towards a fluorescent light or is installed in place where illumination changes
dramatically, the White Balance operation may become unstable.
