marsden PT-500, User Manual

Page: 7 / 13

Switching to Counting mode

To count items on the scale, first place a sample quantity on the scale. Switch the
indicator to count mode by pressing TOTAL, and holding the button until ‘SAMPLE’
is displayed.

Press PRINT
/ON/OFF. ‘PCS’ will display on the screen. Use the LB/KG keys for left
and right and TARE and ZERO as up and down to input the sample size.

To confirm the amount, press PRINT/ON/OFF. Adding more items will increase the
count on the display.

Press HOLD to return to weighing mode.
To set target weights and high or low limits

Press and hold HOLD until ‘F1’ is displayed.

Press and hold ZERO until ‘F2’ is displayed.

Press and hold PRINT until ‘F2.1’ is displayed.

Press and hold ZERO until ‘F2.3’ is displayed.

Press PRINT.

Using GROSS and ZERO, set your target weight, and then press PRINT to confirm.

Press ZERO until ‘F2.4’ is displayed, and then press PRINT.

Using GROSS and ZERO, set your upper error limit, and then press PRINT to
confirm.

Press ZERO until ‘F2.5’ is displayed, then press PRINT.

Using GROSS and ZERO, set your lower error limit, and then press PRINT to
confirm.

Press the HOLD button twice to return to normal weighing.

The display will now flash until you get to within 1kg of the target weight, and will
stay steady until you are 1kg above the target weight.

To display the current target weight in normal weighing mode, press and hold
TOTAL until ‘target’ is displayed, and then press PRINT.

Press PRINT again, and using GROSS and ZERO the target weight can be altered.

Press PRINT to return to weighing.
NB (PT-600 only):

Pressing PRINT whilst under target will print weight and state as ‘less’

Pressing PRINT whilst at target will print weight and state as ‘OK’

Pressing PRINT whilst over target will print weight and state as ‘over’
Page 7