marsden PT-500, User Manual

Page: 6 / 13

Operation
Switching on the scale

Press and hold the PRINT/ON/OFF button for three seconds.

The display will show
‘0.00’ once the scale is ready to begin weighing.
Using Hold

If an unstable weight on the scale causes fluctuations in the weight display, press
the HOLD button and the
indicator will ‘lock’ the weight of the item on the screen.

Press HOLD again to cancel the held weight reading.
Using Tare

You can remove the weight of the pallet by using the TARE function. Place the pallet
only on the scale, and press TARE.

Remove the pallet. The display will show the
pallet’s weight as a minus number.

Add your palletized goods to the scale and the weight of the pallet will be removed.

Press GROSS and the display will show the full weight on the scale.

Press TARE again to cancel the tare weight.
Switching between kg and lb

To switch the scale from kg to lb, press LB/KG.

Press again to return to KG readings.
Using Zero

If at any time the indicator shows a reading when nothing is on the scale, press
ZERO.

The display will then show a zero reading.
Using Accumulation

The accumulation function allows you to add up the weights of several pallets.

Add your first item to the scale and press TOTAL. Remove the pallet from the scale.

Add the next item to the scale and press TOTAL again.

If you would like to see the current total at any time, press and hold TOTAL for at
least two seconds.

To print the individual weights and a total, press PRINT/ON/OFF.

To clear accumulation readings press ZERO.

Press HOLD to return to normal weighing.
Page 6