marsden MBF-6000, User Manual, Page: 4 / 29

Safety Instructions
Before putting the device into use, please read with care the information given in this user
manual, which contains important instructions for proper installation, use and maintenance
of the device.
When the scale is switched on, the display should read 0.0. If it doesn’t, press the ZERO key.
The device is designed to detect when a stable weight is achieved. The indicator will beep
twice to indicate a stable weight value, at which point your reading can be taken.
Marsden/the manufacturer shall not be liable for damages arising from failure to heed the
following instructions:
• When using electrical components under increased safety requirements, always
comply with appropriate regulations.
• Inappropriate installation/use will render the warranty null and void.
•
Ensure the voltage marked on the power supply unit matches your mains supply.
•
This device is designed for use indoors.
•
Observe the permissible ambient temperatures for use.
•
The device meets the requirements for electromagnetic capability. Do not exceed the
maximum values specified in the applicable standards.
•
Batteries should be kept away from small children. If swallowed, promptly seek
medical assistance.
If you have any problems, contact Marsden/your local dealer/your service partner.
WARNING TO INDIVIDUALS WITH A PACEMAKER OR OTHER INTERNAL MEDICAL
DEVICES: This scale sends a weak electrical current through the body during
measurements. Individuals who have internally implanted medical devices, such as
pacemakers, should not use this medical equipment due to the risk of malfunction to
the device that may be caused by the weak electrical current.
Do not use this scale if you are pregnant.
To reduce the risk of electrical shock or product damage, never insert or remove the
power cable with wet hands.
Do not under any circumstances dismantle or alter the device, as this could result in
electric shock or injury
as well as adversely affecting the precision of the scale’s
measurements.
Use only a correctly wired (100-240VAC) outlet, and do not use a multiple outlet
extension cable.
Physically disabled persons should not attempt to take measurements alone, but
instead should be assisted in using the device.
Page 3