1
1
2
2
3
3
4
4
A
A
B
B
C
C
D
D
Parts List
DESCRIPTION
QTY
ITEM
POLE 1"-4" (NOT SUPPLIED)
1
1
MNT-22-1
1
2
MNT-22-2
1
3
MNT-22-4
1
4
MNT-22-3
1
5
Helical Spring Lock Washer St. St.
#5/16
4
6
Plain Washer St. St. #5/16
4
7
Hex Cap Screw St. St. NC 5/16-18 x
1.25"
2
8
Hex Cap Screw St. St. NC 5/16-18 x 5"
2
9
Plain Washer St. St. #1/4
4
10
Helical Spring Lock Washer St. St.#1/4
2
11
Hex Nut St. St. NC 1/4-20
4
12
Hex Nut St. St. NC 5/16-18
2
13
1. Place item No.2 on the antenna,
as illustrated in the drawing.
Align with the screw holes.
2. Connect item No. 2 to the antenna
with spring washers (11),
flat washer (10) and nuts (12).
3. Tighten the nuts at a torque of 30 In*Lbs.
4. Connect item No. 3 to item No. 2 ONLY
as illustrated in Fig.2, with items 6,7,8,13.
Leave screw slightly loose.
5. Connect item No. 3 to item No. 5 as illustrated,
with items 6,7,8,13. Leave screw slightly loose.
6. Attach items No. 4 and 5 to the pole as illustraed,
and connect them using items No. 6,7,9.
7. Adjust the desired angle, and fully tighten the loose
screws (paragraph 4,5).
8. Tighten the nuts at a torque of 30 In*Lbs.
NOTE :
1. MOUNT MNT-22 SUITABLE FOR POLES
n
1"-4".
Mounting instructions - Azimuth and Elevation Adjustable Mount MNT-22
Fig .1
Fig .2
Fig .3
Fig .4
2
2
3
5
2
3
13
8
6
7
10
11
12
7
6
8
13
1
4
7
6
9
Wall Mounting
Fig .5
