Supplied Parts:
GS10 GPS Smart Antenna incl. 5 m (16.4’) cable w/connector.
Quick release mount adapter incl. 0-ring, 2 long mounting screws,
2 short screws, 2 lock adapters.
Pole mount adapter incl. 4 mounting screws and 4 lock washers.
Tools required:
Wire pliers, flat + cross-shaped screwdriver.
10 mm (3/8”) drill bit (if you need to route the cable through a
bulkhead).
2.5 mm (7/64”) drill bit (for the screw holes, to secure the quick
release mount).
SIMRAD GS10
GPS Smart Antenna
Introduction
The GS10 GPS Smart Antenna is a self-contained position provider
for a navigation system. The antenna can be mounted in the ex-
posed environment on a ship, and will supply position data, time,
SOG and COG, using NMEA2000 protocols on Simrad’s SimNet data-
bus.
The GS10 contains a 12-parallel channel GPS receiver with WAAS
and EGNOS. It comes with a fixed 5 m (16.4’) SimNet cable with
connector, ready to connect to a Tee Joiner on the SimNet system,
or navigation product.
Installation
This paper informs how to install your GS10 GPS Smart Antenna and
connect it to a NMEA2000/SimNet network using SimNet network
components.
GS10, bottom view (left) and top view (right).
1
