Mars FLAVIA Barista, User Manual

Page: 5 / 28

Notice
If you are connecting your appliance to the mains water supply, the following requirements
must be met:
A brass stopcock to BS1010 standard with a 15mm compression outlet or a brass stopcock with
3/4 inch BSP male outlet.
Water pressure must be between a maximum of 6.8 bar (100 psi) and a minimum of 1 bar (14.5
psi)
Flow rate of at least 250ml/minute.
Water to be cold drinking water and sodium free.
Install in accordance with local plumbing regulations.
Connect mains water to filter with 3/8 in. NPT male fitting.
Jointing compound should not be used in the water supply to the system as this will a ff ect
the drink flavour, only use PTFE tape.
Do not locate the water supply above the mains power socket.
We draw your attention to the requirements of the Water Supply ( Water fittings)
Regulations 1999.
Plumbed Systems
2
ENG
SAFETY AND INSTALLATION GUIDELINES
REGULATORY COMPLIANCE
This system has been designed and manufactured in accordance with European legislation
relating to Safety and Electromagnetic Compatibility (EMC)
INSTALLATION OF YOUR FLAVIA® barista
Brewer Dimensions and Weight
Height – 17”(432mm) Width – 21.8”(554mm) Depth – 20.6”(517mm)
A gap of 2.5”(60mm) is required behind the Brewer if it is to be plumbed in.
Out of box Weight – 35.6Kg
Weight with water tanks filled – 40Kg
Electrical Supply
It is important that you have a power supply ready so that we can install your new system quickly
and e ffi ciently.
You will need to supply a suitable switched electrical supply to meet the requirements for isolation
of electrical equipment.
i.e. A 13 Ampere supply requires 13 Ampere switched socket or a lockable isolator.
Only use a 230V AC single phase power supply.
Use only one system per socket and ensure it is earthed.
Your system comes supplied with a mains lead 5’9” (1.75m) in length.
Only this lead should be used, no old leads should be re-used.
If you are unsure about
any installation
requirements, consult
an electrician and/or
a plumber.
●
Notice
Ensure that the brewer is placed on a stable level surface capable of safely supporting the
weight noted above. The use of a bespoke FLAVIA® base cabinet is highly recommended.
Contact your local FLAVIA® Customer Service operator for more details.