Owner’s Manual -
Plastic Oscillating Desktop Fan
3
a) Grasp plug and remove from the receptacle or other outlet de
-
vice. Do not unplug by pulling on cord.
b) Open fuse cover. Slide open fuse access cover on top of attach-
1.
Be sure to unplug from the electrical supply source before cleaning.
2.
Plastic parts should be cleaned with mild soap and a damp cloth or sponge thoroughly to remove
soap film with clean water.
3.
Be sure not to make water or other liquid enter inside of motor.
Instructions for operation of body
INSTRUCTIONS FOR USE
Body key
Swing Pull-knob
Push-down to swing
Pull-up for static
Horizontal Swing
Base Installation
Tilt Adjustment
Manual
CLEANING
USER SERVICING INSTRUCTIONS
ment plug towards blades.
c) Remove fuse carefully. Insert the tip of your tool into fuse slot (close with the terminal), then prize
the fuse gradually and slowly, but not overexert. If you feel tight, you can try it at several times and
prize the fuse little by little. When one side of the fuse has been prized, then you can get the fuse out
entirely.
d) Risk of fire. Replace fuse only with 2.5 Amp. 125 Volt fuse.
e) Close fuse cover. Slide close the fuse access cover on top of attachment plug.
f) Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should not be re
-
moved. Discard product if the attachment plug is damaged.
Notice:
1. When you replace the fuse, please don’t operate suddenly or overexert, or else the product will be
damaged or cause accident.
2. When you feel it hard to be operated, please make sure you have got the right way.
