8
5)
Set the remaining Day, Evening, and Night times and temperatures for the Mon – Fri. and Sat & Sun
periods:
• Depress the
PROGRAM
key to select the desired period. (Each depression of this key cycles the menu
to the next period.)
• Depress the
Time/Day
key to switch between time settings and temperature settings at each period.
• Use the red/blue arrow keys to increase/decrease the time and temperature settings.
• The settings are automatically stored 15 seconds after the last touch of a key. NOTE: If the program-
ming at any period is not completed and the display stops blinking, depress the
PROGRAM
key as nec-
essary to cycle back to the desired period to be programmed.
• This procedure is required to program both the
COOL
and
HEAT
system settings.
Temporary Hold
1)
Use the red/blue arrow keys to temporarily raise or lower the set point temperature at any time during nor-
mal operation. The temperature will hold at the new level UNTIL the next program period begins at which
point the thermostat will return to the program temperature.
Vacation Hold
1)
The thermostat can be set to hold a single specific temperature for up
to 30 consecutive days. Upon activation, the thermostat will hold the
temperature until the duration period times out at which point the ther-
mostat will return to program mode. To activate this feature, depress
the
VACATION
key. The LCD will display the duration in days and the
set point temperature.
2)
Use the red/blue arrow keys to adjust the set-point temperature to the desired level.
3)
Depress the
TIME/DAY
key to select the duration of the hold period (up to 30 days). After 10 seconds
from the last touch of a key, the thermostat will store the setting and the LCD will return to its normal set-
ting.
Image shows 1 day
hold at 73 F
Image shows 25 day
hold at 71 F.
70812-IM 12/21/06 3:06 PM Page 8
