Programming Configurations
- Step-by-Step Guide
VHP ONLY
1.
Power on the
Smart
Reader either by pushing the red power button or pulling the trigger.
2.
Confirm the time and date at the top of the screen are correct.
This must be accurate, as the
Smart
Reader updates the time in the
Smart
Transmitter according to the time and date in the
Smart
Reader. If the time is incorrect, continue to Step 3. If it is correct, proceed to Step 4.
3.
To reset the time and date in the
Smart
Reader:
a.
Press the down-arrow key 3 times to highlight “ADMIN”. Press the Enter key or pull the
trigger.
b.
“SMART-READER SETUP” is automatically selected. Press the Enter key or pull the
trigger.
c.
Press the down-arrow key 3 times to highlight “TIME & DATE”. Press the Enter key or
pull the trigger.
d.
Key in the time and date in this format: YYYY-MM-DD HH:MM.
e.
Press the Tab key 5 times until the Day of the Week list appears. Use the up and down-
arrow keys to select the Day of the Week.
f.
Press the Enter key or pull the trigger when done. The time and day at the top of the
screen will be updated. Press the Exit key twice.
g.
Press the up-arrow key twice to select “MARS RADIO SET-UP” and press the Enter key or
pull the trigger. Proceed to Step 5.
4.
Press the down-arrow once to highlight “MARS RADIO SET-UP”. Press Enter key or pull the
trigger.
5.
You now have the option to use either a user defined setting or a preset configuration. If these
configurations are preset, proceed to Step 5a. If these are not set, proceed to Step 6.
a.
Use the arrow keys to highlight the configuration and press the Enter key or pull the
trigger.
b.
Press the F4 key and follow any prompts. When this function is complete, the
Smart
Transmitter is programmed.
c.
Press the Exit key twice, up-arrow key once, and use the “TEST READING” function to
check the register.
Programming is complete.
Note: You may need to repeat Step 5c once or twice to get a reading. Many factors can
either cause interference, and if you move the nozzle off of the radio before the operation is
completed the SmartReader may not correctly communicate with the SmartTransmitter.
6.
To set Configuration 1-3, use the up and down-arrow keys to highlight the specific
Configuration. Press the Enter key.
7.
Highlight the first option to change. Press the Enter key.
Page 12 of 21