ZEUS4-MC Lite
INSTALLATION MANUAL
13
Remote programming by SMS
;DD1=1;DD2=2;
10.2.4
TN parameters
Telephone numbers for remote alarm reporting are listed as TN parameters. Remote alarm reporting
on ZEUS4-MC LITE is done via SMS messages or VOICE call.
ZEUS4-MC LITE sends an alarm beep, an alarm SMS message or both. If the corresponding name
ends with the letter
“V”
only alarm beep is sent and if the name ends with the letter
“M”
only SMS
message is sent.
Table of parameters:
Name
Comment
TN1
1
st
telephone number
TN2
2
nd
telephone number
TN3
3
rd
telephone number
TN4
4
th
telephone number
Table 9: TN parameters
NOTE
By pressing * on your phone you switch OFF the redial call for calling number. The
remaining numbers are called as usual. By pressing # you switch off all remaining
calls.
Example:
When you need to send an alarm beep message and SMS message to the first telephone number and
only alarm beep message to the second one and only SMS message to the third one. (See the table
below).
Direct programming on the SIM card
ZEUS4-MC LITE PROGRAMMING TABLE
SIM CARD PHONE BOOK
Name
Number
Description
TN1
042376678 1st telephone number (alarm beep & SMS message)
TN2V
040719479 2nd telephone number (alarm beep only)
TN3M
040308350 3rd telephone number (SMS message only)
Table 10: TN parameters example
Remote programming by SMS
;TN1=042376678;TN2V=040719479;TN3M=040308350;
