2. Set “Digital compass” to “Enable.”
3. Select “Calibrate digital compass.”
4. Press
to prepare for calibration. Move the camera as shown.
5. Screen will display the following, indicating the compass calibration is complete.
GPS Firmware Upgrade
In order to fix bugs and improved stability, Marrex may release new versions
of the firmware. The new firmware will be released on our website. You
could update your MX-G10 MKII by the following steps:
1. Download update file (.upd) from www.marrex.cn to your computer.
2. Connect the GPS to your computer by the supplied USB cable. The MX-G10
MKII will show up on your computer as a removable drive.
3. Copy the update file (.upd) to the MX-G10 MKII, it will be upgraded
automatically, and the LED will blink yellow.
4. When the upgrade is successful, the LED turns to solid yellow. If fails, the
LED turns to blink red, then please unplug the USB cable and try again.
• On the EOS-1DX and other models that display the above screen, set
“GPS device” to “Enable”, and then select “GPS device settings”
