Statement
Please read this manual carefully before using and strictly operate and store
in accordance with the instructions. Please save it for your future reference.
If the user manual cannot help you to solve certain problems, please ask
your retailer for help or email us: [email protected].
Cautions
• Do not use the unit under water, and don't expose it to rain. Please store
it in a cool, dry place.
• Please charge the unit strictly according to related rules. Otherwise,
damage might be caused to the battery.
• Please do not move it from overheated to supercooled conditions
frequently, as well as keep away from heat sources such as heater and
oven.
• Please be careful to install the MX-G10M MKII gently to avoid damage to
the device or camera.
• Please turn off the power when left unused.
PRODUCT INTRODUCTION
General Introductions
The Marrex MX-G10 MKII is a new version of GPS receiver specially designed
for Canon DSLR cameras. It is very useful for photographers to organize stock
photos. With the MX-G10 MKII, figuring out when, where and why a certain
photo was taken is not a problem anymore. When connected to the camera
and positioned successfully, the GPS information (longitude, latitude, elevation
and Coordinated Universal Time) will be recorded as EXIF data. With the
log function, travel routes will be recorded into internal storage. The MX-G10
MKII is equipped with a built-in Li-ion battery and LED indicator. In addition,
the MX-G10 MKII uses a highly sensitive antenna and upgraded GPS chipset
to enhance the speed of positioning.
Highlights
• GPS data-hold
If the GPS signal is lost, the MX-G10 MKII will automatically reuse the last
valid GPS information for tagging the current photo. Once the receiver is
turned off, the stored GPS data will lost.
• Built-in Li-ion battery
A built-in rechargeable battery can continuously run for up to 6 hours. When
connected to a camera, the MX-G10 MKII will not charge from the camera.
