L
M
U
32
4
4
L
L
M
W
W
09 / 18
STEP 6
No. Components in this step Qty
CORNER BEAM COVER
MID BEAM COVER
ST4 x 12
Install the Beam covers
Find all components in this step.
6-A Assemble the CONNER BEAM COVER (L) onto the corner of beams with 4 tapping screws (W).
6-B Assemble the MID BEAM COVER (M) onto the middle of beams with 4 tapping screws (W).
Repeat the step until 8 beam covers are assembled.
To make your gazebo look better, avoid leaving gaps between beam covers and beams.
TIPS
After this step you should place the gazebo frame
in its desired location.
Make sure all corners are squared at 90 degrees.
Then you can tighten all bolts by hand tool except
those on the mid rib connectors.
