8
Just Drive
Comfort control unit for pedelecs and e-scooters
5
Operating and display elements
Use the keys on the Comfort control unit to regulate the functions of the pedelec system ergo-
nomically. The hand can remain on the handlebar grip, while the thumb can operate the keys on
the Comfort control unit. The displays on the control unit display provide information about the
driving situation and the support aids.
5.1
Operating keys
The keys on the Comfort control unit are used to control the functions of the pedelec system.
Fig. 1 Keys and joystick of the Comfort control unit (figure shows left-hand installation. The display and
function of the keys are mirrored when mounted on the right-hand side). Shown amount of support levels
and battery indicators may vary due to your system configuration.
Key
Function
T1
Increase support level
Hold > 3s: Switch on push mode until key is no longer held.
T2
Reduce support level
T3
Joystick:
One page up.
Switch to editing mode.
One entry higher in editing mode.
Move to the next page to the left.
In editing mode, exit the mode and confirm the value.
In edit mode, edit the highlighted value.
Switch to the next page to the right.
In editing mode, exit the mode and confirm the value.
Move one page down.
Switch to editing mode.
One entry higher in editing mode.
T4
Switch the Comfort control unit on and off.
T5
Short press: Switch on the light.
Long press: Switch off the light.
In automatic mode: The light is switched on or off depending on the ambient light. The
light can always be switched on or off manually using this switch.
