background image

 

 

 

 

Just Drive Comfort control

 unit for pedelecs and e-scooters 

About this operating manual 

This manual serves as a content recommendation for the overall system manual of an overall 

system and does not serve as an end customer operating manual. 

 
 

1.1 

Display modes 

The following display modes are used to highlight special elements of the operating manual: 

Safety instructions 

Safety instructions in this manual are identified by symbols. The safety instructions are intro-

duced by signal words which express the extent of the danger. 

 

WARNING! 

This combination of symbol and signal word indicates a potentially dangerous 
situation which, if not avoided, could result in death or serious injury. 

 

 

CAUTION! 

This combination of symbol and signal word indicates a potentially dangerous sit-
uation which, if not avoided, may result in minor or moderate injury. 

 

 

NOTE! 

This combination of symbol and signal word indicates a potentially dangerous 
situation which, if not avoided, may result in property damage and environmen-
tal damage. 

 

 

 

Tips and recommendations

 

 

 

This symbol highlights useful tips and recommendations as well as information 
for efficient and trouble-free operation. 

 

 

 

Other markings 

The following markings are used in this manual to highlight instructions for action, results, lists, 

references and other elements: 

Steps for action 

Steps for action are displayed as a numbered list. The sequence of the steps must be observed. 

The system reactions to the respective operating action are marked by an arrow. 

Example: 

1.  First operating action / step 

2.  Second operating action / step 

 

Reaction of the system to the operating action enumerations 

 

 

Summary of Contents for Just Drive Comfort 4313 Series























Reviews: