EN
16
USE
When the product is new
Fully charge the product before using for the first time.
Charging the speaker
1.
Connect the adapter cable to the speaker's charging port.
2.
The red status light comes on to show that the product is charging.
3.
The red status light goes off when product is fully charged.
Pairing
1.
Place the speaker within 9 metres of the Bluetooth device.
2.
Put the switch in the ON position. The blue status lamp flashes slowly 3 times and then
flashes quickly to indicate pairing mode.
3.
Follow the instructions on the Bluetooth device to search for the speaker.
4.
The speaker's name when pairing is M1. If a PIN code is requested, enter 0000.
5.
The blue status lamp flashes when pairing is complete.
Use
Set the switch in the ON position to start the speaker. An audio signal is give and the blue status lamp
flashes slowly. The blue status light is on during music playback.
Status lights
Charging
Red light on
Fully charged
Red light out
Pairing mode
Blue light flashes quickly
Connected
Blue light on
Playback
Blue light flashes slowly
Summary of Contents for 920-534
Page 16: ......