EN
33
• The following indications are given.
Temperature/humidity increasing.
Temperature/humidity constant.
Temperature/humidity decreasing.
• Measuring range temperature indoors:
0 to 50°C (32 to 122°F). LL,L is shown if
the value is less than 0°C (32°F). HH,H is
shown if the value is higher than 50°C
(122°F).
• Measuring range temperature outdoors:
-40 to 70°C (-40 to 158°F). LL,L is shown if
the value is less than -40°C (-40°F). HH,H
is shown if the value is higher than 70°C
(158°F).
PRECIPITATION DATA
Press the button
RAIN/ALERT
to show
precipitation data. Press the
RAIN/ALERT
button repeatedly to show the actual value
for the amount of precipitation or cumulative
values for the last hour, 24 hours, 1 day, 7 days,
month, year or in total.
• The actual value is the amount of
precipitation from when it started to when
no precipitation has been registered for
30 minutes. Resets to 0 after 30 minutes
without precipitation.
• History for the last hour shows the
cumulative value for the last 60-minute
period. If for example the time is 07:31
the total registered precipitation is shown
between 06:32 and 07:31.
• History for 24 hours shows the cumulative
value for the last 24-hour period. The
value for the last hour is registered every
full hour, after which the values are added
to a cumulative value for 24 hours.
• History for day shows the cumulative
value for the last day (from 0:00 to
23:59). The value is reset to 0 at 00:00.
• History for 7 days shows the cumulative
value for the last 7-day period, which is
obtained by adding the values for each
IMPORTANT:
• The alarm will continue for 1 minute if it
is not deactivated by pressing a button.
In which case the alarm will repeat
automatically after 24 hours.
• Ascending alarm signal (duration
1 minute): The volume changes 4 times
during the duration of the alarm signal.
SWITCHING OFF THE ALARM
Press any button to switch off the alarm.
SIGNAL TRANSFER FROM
WIRELESS SENSOR
When the main unit receives a signal from
the wireless sensor the value is shown for
the outdoor temperature and amount of
precipitation on the main unit display. If the
main unit does not receive signals from the
outdoor sensor for temperature and humidity
(- - is shown on the display), press the button
HIST/UP
for 3 seconds to search for the signal
manually. The icon with a radio mast flashes
on the main unit and the main unit connects
to the sensor again.
IMPORTANT:
When the main unit is not correctly
connected to the wireless sensor, -- is shown
for the outdoor temperature and amount of
precipitation on the main unit display.
DISPLAY OF TEMPERATURE AND
TRENDS FOR TEMPERATURE
• The actual values for temperature indoors
and trend for temperature indoors are
shown on the display.
• When a connection is established with the
outdoor sensor the main unit can show
the temperature outdoors and trend for
temperature outdoors.
Summary of Contents for 014369
Page 4: ...2 1 1 2 3 7 8 4 5 6 9 10 12 11 1 2 3 4 5 6 7 8...
Page 5: ...3 1 2 3 4 5 6 7...
Page 6: ...4...
Page 7: ...5 6...
