Marquant 014331, Operating Instructions Manual

Page: 48 / 55

EN
48
synchronisation attempt will be made one
hour later. This is repeated automatically
up to 5 times a day.
• Keep the button pressed for 3 seconds to
activate search mode for the RCC signal
manually. The search takes up to 7
minutes.
NOTE:
A flashing radio mast signal shows that
searching for the RCC signal is in progress.
When the RCC signal search is correctly
completed and the clock is set the radio
mast icon remains constant. The DST icon
indicates that the calibrated clock setting is
for summertime.
ALARM MODE
1. Tap the "C" button to show the time for
alarm 1, tap again to show the time for
alarm 2, and tap a third time to exit the
display mode.
2. When the time for alarm 1 or alarm 2 is
shown, tap the "B" button to activate/
deactivate the alarm function.
NOTE:
• The icon (alarm symbol) 1 or 2 is shown
when alarm 1 or 2 is activated. The
relevant icon for alarm repetition
(M-F/S-S) is shown at the same time.
• The display mode closes after 20
seconds if no buttons are pressed, or
when the "A" button is pressed.
SETTING THE ALARM OCH SNOOZE
MODE
1. Press the "C" button for 3 seconds to
activate settings for alarm and snooze
mode.
2. Tap the "D" or "E" button to change the
value. Press the button to change the
value quicker.
time zone is set to 00. For a time zone
one hour after Germany the time zone is
set to -01. For a time zone one hour
before Germany the time zone is set to
01. For a time zone two hours before
Germany the time zone is set to 02.
• At distances of more than 1500 km from
the signal transmitter in Germany the
reception of the radio clock signal is very
weak. In which case RCC should be set to
OFF.
• The number of seconds is reset
automatically when changing the
number of minutes.
DISPLAY LANGUAGE
Choose between 8 display languages for
weekday: English, German, French, Italian,
Spanish, Dutch and Danish.
RADIO CONTROLLED CLOCK (RCC)
• After switching on the weather station it
searches for the wireless sensors (up to 3
minutes), after which it automatically
switches over to radio controlled clock
setting. The weather station automatically
searches for the RCC signal for 7 minutes.
The RCC signal icon flashes and the
backlight goes off automatically.
NOTE:
When searching for the RCC signal the
product should not be subjected to
interference, which is why the backlight goes
off automatically. Wait 7 minutes without
making any settings. The search for the RCC
signal can be interrupted by pressing the
button for 3 seconds.
• The weather station automatically searches
for the RCC signal 01:00/02:00/3:00
every day to correct the time setting. If the
synchronisation fails (the radio mast icon
disappears from the display) a new