Marquant 014331, Operating Instructions Manual

Page: 47 / 55

EN
47
SETTING THE TIME AND UNIT
1. Press the "B" button for 3 seconds to
enable time setting mode.
2. Tap the "D" or "E" button to change the
value. Press the "D" or "E" button to
quickly change the value.
3. Tap the "B" button to confirm and go to
the next item.
NOTE:
The settings mode closes after 20 seconds if
no buttons are pressed, or when the button
is pressed.
SETTINGS SEQUENCE
1. Audio signal ON/OFF
2. Unit for temperature: °C/°F
3. Unit for pressure: hPa/inHg/mmHg
4. Unit for wind speed: km/h/mph
5. Wind direction in degrees or with letters
6. Unit for amount of precipitation: mm/
inches
7. Radio controlled clock setting: ON/OFF
8. Time zone: -1 to 2 h
9. Format for time display: 24 hour format/12
hour format
10. Hours
11. Minutes
12. Display format for calendar: Month/day or
day/month
13. Year
14. Month
15. Day
16. Language for display of day: Total of 7
languages.
17. Initiation of weather settings
NOTE:
• When the weather station is placed in
the same time zone as Germany the
• Keep the batteries and screwdriver handy
for the installation.
• Keep the sensors within 1.5 and 3 metres
of the weather station for at least 15
minutes after inserting the batteries, so
that the sensors can connect with the
station several times.
HOW TO USE
QUICK SETTINGS
1. Insert 3 AA batteries in the multifunctional
wireless remote sensor.
2. Insert 3 AA batteries in the wireless
remote sensor for temperature/humidity.
3. Connect the power cable to the weather
station.
4. Configure the basic settings. Set the date,
time, unit etc.
5. Insert 2 AA batteries in the weather
station to prevent losing the settings in
the event of a power failure.
6. Wait 5 minutes and then move the
remote sensor outdoors or away from the
station.
7. Move the weather station to the required
location, at least 2.5 metres from sources
of interference such as a television or
computer. Note that radio reception is
worse in basements and rooms with
concrete walls. Place the weather station
near a window if the reception is poor.
NOTE:
The weather station has radio controlled
clock setting. After switching on the weather
station it searches for 3 minutes or on all
channels for the wireless sensors, after which
it switches over to radio controlled clock
setting. To set the time and unit manually,
press the button "B" to exit radio controlled
clock setting mode and go to next step.