EN
USE
1. Open the battery cover on the back of the
clock.
2. Insert an AA battery (MN1500, LR6 or
equivalent) in the battery compartment on
the back of the clock. Battery sold separately.
Check the polarity of the battery.
3. Replace the battery cover.
4. Turn the dial on the back to set the time
anticlockwise to set the correct time.
5. Turn the dial on the back to set the alarm
anticlockwise until the alarm hand points
to the set time.
6. Activate the alarm function by pushing
up the ON/OFF switch. Note that this is
a twelve-hour clock, which means that
the alarm goes off twice a day if it is now
switched off.
7. Switch off the alarm by pushing down the
ON/OFF switch.