EN
19
Approved as per
applicable directives.
Recycle discarded product
in accordance with local
regulations.
TECHNICAL DATA
Mains voltage
230 V ~ 50 Hz
Transformer
5 V DC
Speaker output
40 W (20 W RMS)
Battery capacity
2200 mAh/7.4 V
Run time
6 h
Charging time
4 h
Connections
Bluetooth 4.2
3.5 mm AUX
micro USB
Signal/noise ratio
≥ 75 dB
Dimensions
200 x 60 x 65 mm
Weight
742 g
DESCRIPTION
1. Volume -
2.
3. Play/Pause, answer call, switch mode
4. Function indicator
5. Power switch
6. Micro USB input
7. 3.5 mm AUX input
8. Reset
9. Microphone
FIG. 1
FIG. 2
FIG. 3
USE
Pairing
1. Place the speaker near a unit with activated
Bluetooth.
2. Press the power switch to start the speaker.
One red and one blue status light flash
alternately. The speaker is now in pairing
mode.
3. Follow the instructions on the unit to search
for the speaker.
4. The speaker is called G01, enter PIN code
0000 if necessary.
5. The blue status light goes on when the
pairing is finished, and an audio prompt is
given. The speaker connects automatically
to the last paired unit during the first
3 seconds after starting. If it is not possible
to connect to the unit the speaker switches
automatically to pairing mode.
NOTE:
The pairing time varies between different
mobile phones. The speaker only needs to be
paired with the unit the first time. It will then
automatically connect to units it has been
paired with. (The speak can only remember
the last 8 units.)
AUX input
The speaker has an AUX input and can easily be
connected to units without Bluetooth with a 3.5
mm audio cable. The green status light goes on
when a cable is connected for playback.
NOTE:
If the audio cable is connected when the
speaker is in Bluetooth mode it will switch
automatically to cable mode.
Summary of Contents for 002774
Page 4: ...1 2 3 1 2 3 4 5 6 7 8 9...