Trawl Explorer | V5 | Sensor Configuration
Configuring the Uplink, Up and Down Settings
You can configure different settings for uplink, down and up soundings.
Before you begin
The sensor is connected to Mosa2.
About this task
Remember:
Always click
Apply
after you change a setting and make sure there is a green
check mark .
Procedure
Click the tab
Trawl Explorer
.
Uplink
Procedure
From
TE Uplink Frequency
, enter a frequency for the signal toward the vessel.
Important:
This parameter must be the same in the sensor settings in Scala/Scala2.
Up/Down Soundings
Procedure
1.
From
NBTE Setup Options
, select the sounding mode (see
on page 18 for
more information).
2.
From Down and Up
Sounding Range
, select the range according to how many meters you want
to see under the sensor.
19
