4
Dock
| Quick Reference Guide | V2
© 2022 Marport. All Rights reserved.
No part of this document may be reproduced, stored in a retrieval system or transmitted in any form by any means; electronic, mechanical,
photocopying or otherwise, without the express written permission from Marport. “Marport”, the Marport logo and Software Defined Sonar are
registered trademarks of Marport. All other brands, products and company names mentioned are the trademark and property of its respective owners
only. Marport is a division of Airmar Technology Corporation.
Iceland
Marport EHF
Fossaleyni 16
112 Reykjavík, Iceland
South Africa
Marport South Africa
Cape Town, Western Cape,
11 Paarden Eiland Road,
Paarden Eiland, 7405
France
Marport France SAS
8, rue Maurice Le Léon
56100 Lorient, France
Norway
Marport Norge A/S
Breivika Industrivei 69,
6018 Ålesund, Norway
USA
Marport Americas Inc. USA
12123 Harbour Reach Drive
Mukilteo, WA 98275 USA
Spain
Marport Spain SRL
Camino Chouzo 1
36208 Vigo (Pontevedra) Spain
Troubleshooting
Offices
Warning messages on the Dock screen
Status message
Description
Warning - Clean sensor
endcap
The sensor cannot connect to the Dock because the
shoulder bolts are dirty or damaged:
• Clean them using a swab or Q-tip with Isopropyl
alcohol.
• Fully clean the surface from debris and inspect the
surface for burrs or pitting.
If not taken care of, there is a risk of short circuit.
Warning - Service required
The sensor has a critical issue. Contact your local
Marport office or dealer.
Caution - Maintenance
required
The sensor has an issue impacting its proper
functioning. Reasons can be:
• The battery is worn out and the charging capacity is
diminished.
• Shoulder bolts are in a bad condition, the charge is
not optimal.
Caution - Replace battery
The battery capacity is very low and will soon be
exhausted.
United Kingdom
Marport UK ltd
32 Wilson Street
Peterhead, AB42 1UD
United Kingdom
