M6 - Mx computer System | V2 | Installation
Configuring the Receivers
You need to update both Mx receivers to make them compliant with an M6 system.
About this task
In this procedure, the Mx receivers are called receiver 1 and receiver 2. It is up to you to choose
which is 1 or 2.
Updating the Mx Receivers
Procedure
1.
Open Scala/Scala2.
2.
Connect receiver 1 to the Mx computer.
3.
Wait between 3 seconds and 3 minutes and click
OK
to the following message:
4.
Wait for the receiver update to be complete.
Note:
You may have this error message when the receiver disconnects itself. Click
OK
.
When the update is complete, there is a green check next to
H1-H2-H3 Module
.
|
39
