M6 - Mx computer System | V2 | Installation
Powering the Mx computer
About this task
Important:
Only use recommended power supply MEAN WELL HEP-150-24 A. Marport
cannot not be held responsible for dysfunction of the system if recommended equipment is
not used.
Procedure
1.
Connect the power cable to the Mx computer.
2.
Connect MEAN WELL power supply to a power socket.
3.
Press
on the Mx computer to switch it on.
Changing Mx computer IP Address
You need to change the IP address of the Mx computer if the Mac computer is connected to another
network that has the same subnet as the Mx computer.
About this task
Note:
If the Mac computer is connected to another network (WiFi, wired), check the IP
address of this network. If it has the same subnet as the Mx computer (192.168.
10
.XXX), you
need to put a different subnet to the Mx computer, such as 192.168.11.170.
Procedure
1.
Open Mosa2 and click the receiver icon on the discovery page.
2.
Click
in
Receiver information
.
3.
Change the
IP Address
to
192.168.11.170
and the
Gateway adress
to
192.168.11.1
.
|
36
