System Configuration and Display
Learn how to configure the receiver and display the sensor data in Scala2 application.
Adding the Sensors to the Receiver
You need to add the sensors to the receiver in order to display their data on Scala2.
Adding the Sensors to the Receiver
You need to add the sensors to the receiver using the system web page.
1. From Scala2, click
Menu
> Expert Mode
and enter the password
copernic
.
2. Right-click the IP address of the receiver at the bottom of the page, then click
Configure Receiver
.
3. From the left side of the receiver page, click
Sensors
.
4. From the page
Add Sensor Product
select:
a.
Product Category
: TE/Catch
b.
Product Name
: Catch Navigator
c.
Trawl Gear Location
: same as defined in Mosa2 (see
).
Catch Navigator
| V1 | System
Configuration and Display
37
