Printed in USA 10/13 © 2013
8
36132-EN
Cream Dispenser
Model SKMCD1P/C1
P
RINCE
C
ASTLE
LLC
W O R L D W I D E
Cleaning and Refilling the Dispenser
Remove the empty bag of cream.
When removing
an empty bag of cream, be sure to push the valve slide
in fully before pulling the dispensing tube out of the
valve.
1
Remove the valve
insert.
To remove the
valve insert once the
beverage container is
empty, simply press
on the valve slide and
remove the valve
insert by pulling it
straight up.
2
Clean the valve and
valve area.
Once
removed, the valve
can be cleaned with a
brush and warm
soapy water or in a
dishwasher. The
valve area in the
dispenser should also
be cleaned with a
brush and warm
soapy water.
3
Insert a new bag into the container.
Insert a new
beverage bag into the container. Lock the tube into
place at the bottom of the container.
4
Install the container
and bag.
Place the
container inside the
cabinet and guide the
tube through valve
area. Be sure the
tube is straight and
centered to avoid
kinking, which could
result in reduced
product flow or
leaking.
5
Install the valve
insert.
Push and hold
the valve slide while
inserting the valve
insert from above.
6
Cut the tube.
Cut the
tube 1" (2.5 cm)
below the valve.
7
Press the REFILL
button.
Press and
hold the REFILL
button for 3 seconds
(the display will read
00) to alert the
dispenser that a new
beverage bag has
been installed.
8
