Marmitek CONNECT 225, User Manual

Page: 8 / 56

8 © MARMITEK
You are also able to record the device connected to INPUT 1 (10) while watching another
device at the same time. To do so:
1. Switch to INPUT 1 and start the recording.
2. Switch the INPUT 1 RECORD switch (5) on the front side to the ON position. This will lock
the recording.
3. You now can select any of the other two devices without disturbing the recording of
INPUT 1.
FReQUentLY ASKeD QUeStIonS
No picture
1. Check to verify that your Scart Cable is properly connected to your system and the
Connect 225.
2. Check to verify that your Scart Cable is properly plugged into your TV from the Connect
225 Output.
3. Check to verify that you have selected the correct input channel.
4. Check to verify your TV is on the appropriate video input.
5. Check to verify that your TV and Connect 225 are turned on.
No sound
1. Check the connecting cables.
2. Check the volume setting of the TV.
3. Check whether the audio signal is transmitted by the cable used (S-VIDEO cables or
partially pinned Scart cables do not transmit audio).
4. Check to verify that your TV and system are turned on.
The image is very grainy/there is background interference
1. Switch off equipment which is not being used. Sometimes equipment gives off a very
strong signal, which can cause interference.
2. Check the quality of the cables used.
tecHnIcAL DAtA
General
Power requirements: 9V -12V 100mA
Power consumption: 1W
Dimensions (WxDxH): 310mm x 110mm x 52mm
Mass: 0,5Kg
Inputs/Outputs
Inputs: 3x Scart (RGB/S-VHS) (video, stereo audio).
1x cinch A/V parallel input for Video Camera (video, stereo audio).