BLADE SELECTION
The Marlon 350 Auto Crimper features interchangeable cutter
blades. Your Marlon 350 was shipped with the B-size cutter blades
installed. Use the following chart to determine what blade size is
required for the coil diameter you are crimping.
A-size blades: 6mm and 7mm coil
(Sold Seperately)
Note: Oversized punch patterns (.248) or punch patterns with a large backstop (distance
from paper edge to hole) will not work well with the A – size cutter head.
B-size blades: 8mm through 35mm coil up to and including .093
filament diameter with stop bolts in place. 38mm through 50mm
.103 filament diameter with stop bolts removed
C-size blades: 18mm through 50mm coil
(Sold Seperately)
C blades give a slightly longer tail and tuck on the crimp
The cutter blades and cutter head assemblies have been color
coded to reduce the chance of improper assembly.
1.)
Universal parts
of the cutter head assembly that are used for
all three sets of knives are
marked white
. These parts are used all
of the time.
2.)
A-size parts
of the cutter assembly are
marked red
.
3.)
B-size parts
of the cutter assembly are
marked green
.
4.)
C-size parts
of the cutter assembly are
marked yellow
.
Note: Some parts of the cutter assembly are marked with two
colors. These parts are used on two of the three cutter assembly
configurations.
