MGTE 1-1/2” METERED & TIMECLOCK
INSTALLATION
6
Phone: (262) 681-1300 • Web: www.Marlo-Inc.com • E-mail: [email protected]
NOTE: Program Timer “Lockout” Feature
The Program Timer is initially set to allow access to all Programming, Diagnostic and History screens
The Installer can limit access to (lockout) most screens by activating the Lockout Feature.
Activating “Lockout” allows the user to view and change only Water Hardness, Days Override, Time of Regeneration
and Time of day.
Activate “Lockout” Feature: Press DOWN then NEXT then UP then SET CLOCK in sequence. LOCK will briefly
appear in the display.
De-activate “Lockout” Feature: Press DOWN then NEXT then UP then SET CLOCK. UNLOCK will briefly appear in
the display.
When in operation normal user displays such as time of day, gallons remaining or days remaining before regeneration
are shown. When stepping through a procedure if no buttons are pressed within five minutes the display returns to a
normal user display. Any changes made prior to the five minute time out are incorporated. The one exception is
current flow rate display under the diagnostic procedure. The current flow rate display has a 30 minute time
out feature.
