Marley 935 Installation & Maintenance Instructions Manual Download Page 12

LIMITED WARRANTY

All products manufactured by Marley Engineered Products are warranted against defects in workmanship and materials for one
year from date of installation, except heating elements which are warranted against defects in workmanship and materials for
five years from date of installation. This warranty does not apply to damage from accident, misuse, or alteration; nor where the
connected voltage is more than 5% above the nameplate voltage; nor to equipment improperly installed or wired or maintained
in violation of the product’s installation instructions. All claims for warranty work must be accompanied by proof of the date of
installation.

The customer shall be responsible for all costs incurred in the removal or reinstallation of products, including labor costs, and
shipping costs incurred to return products to Marley Engineered Products Service Center. Within the limitations of this warranty,
inoperative units should be returned to the nearest Marley authorized service center or the Marley Engineered Products Center,
and we will repair or replace, at our option, at no charge to you with return freight paid by Marley. It is agreed that such repair or
replacement is the exclusive remedy available from Marley Engineered Products.

THE ABOVE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, AND ALL IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH EXCEED THE AFORESAID
EXPRESSED WARRANTIES ARE HEREBY DISCLAIMED AND EXCLUDED FROM THIS AGREEMENT. MARLEY
ENGINEERED PRODUCTS SHALL NOT BE LIABLE FOR CONSEQUENTIAL DAMAGES ARISING WITH RESPECT TO THE
PRODUCT, WHETHER BASED UPON NEGLIGENCE, TORT, STRICT LIABILITY, OR CONTRACT.

Some states do  not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limita-
tion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state.

For the address of your nearest authorized service center, contact Marley Engineered Products in Bennettsville, SC, at 1-800-
642-4328. Merchandise returned to the factory must be accompanied by a return authorization and service identification tag, both
available from Marley Engineered Products. When requesting return authorization, include all catalog numbers shown on the
products.

HOW TO ORDER REPAIR PARTS

In order to obtain any needed repair or replacement parts, warranty service or

technical information, please contact Marley Engineered Products Service Center
toll-free by calling  1-800-642-HEAT. 

When ordering repair parts, always give the information listed as follows:

1. The Part Number 

3. The Part Description

2. The Model Number 4. Date of Manufacture

5/01

5200-2386-001

ECR 34345

12

SPX Corporation
470 Beauty Spot Rd. East
Bennettsville, SC  29512 USA

Summary of Contents for 935













Reviews: