19
One Chirp
Two Chirps
Three Chirps
Four Chirps
Button
One LED Pulse
Two LED Pulses
Three LED Pulses
Four LED Pulses
(Default Setting)
Ignition Controlled
Door Lock Only
Ignition Controlled
Door Unlock Only
Ignition Key Controlled
Door Lock and Unlock
Pathway Illumination
Feature “Off”
Parking Lights “On”
for 30 Seconds Upon
Alarm Disarm
3.5 Second Door
Lock / Unlock Pulse
0.8 Second Door
Lock / Unlock Pulse
Ignition Key Door
Lock Control Off
Parking Lights “On”
for 30 Seconds When
Disarmed and “On” 10
Second when armed
Before 15 seconds has passed, push and release the
valet switch 4 times holding the button down on the
4th press. Wait until 2 short chirp/beeps + 1 long
chirp/beep is heard. Release the button. You are now in
“Alarm Feature Programming (Group 2)” mode.
ON
O F F
3X
3X + 1X (Hold)
With the ignition switch in the OFF position, Turn the
ignition switch On - Off - On - Off - On - Off
Step 3
Remote Feature Programming
Press the transmitter buttons as illustrated to adjust the features required. Keep re-pressing the transmitter button
that relates to the feature you want to adjust until the correct amount of chirp/beeps is heard then move on to the
next feature.
Comfort Feature:
Some vehicles (Mercedes, BMW, VW,etc.) have a special “Comfort Feature”. When you lock the
door with the ignition key, you keep the key in the “lock” position for about 5 or 7 seconds and the windows will
close. If the vehicle has a “Comfort Feature” and you want the windows to closed upon Lock/Arm the security
system, you can set the door lock output to “Comfort Feature”.
+
Out of Range Checking
is On
Out of Range Checking
is Disabled
Five Chirp
Five LED Pulses
Six Chirp
Six LED Pulses
Alarm Feature Programming (Group 2)
Step 1
Step 2
0.8 Lock Pulse,
Double 0.8 Second
Unlock Pulse
0.6 Second Lock Pulse
/ 0.6 Second Unlock
Pulse
Door Lock with
Comfort Feature
0.6 Second Door
Lock / Unlock Pulse
Door Lock
Before Start
Door Lock
Before Start and
After Shutdown
Door Lock
After Shutdown
Without
this Feature
