![marklin Connect-6017 Manual Download Page 4](http://html.mh-extra.com/html/marklin-0/connect-6017/connect-6017_manual_1728174004.webp)
4
Booster 6015: Das Kabel geht nach unten (!).
Werden weitere Booster eingesetzt, so werden diese
jeweils an den Ausgang des gerade montierten Boosters
mit dem mehrpoligen Verbindungskabel angeschlossen.
Vorsicht! Auch hier auf die korrekte Lage der Stecker
achten.
5. Netzstecker der Versorgungstrafos in die Netzsteckdo-
sen einstecken.
Betriebshinweise:
1. Central Station schaltet auf „Stop“:
=> Connect-6017 schaltet ebenfalls die Booster ab
(Betriebs LED aus).
Central Station wird auf „Go“ geschaltet:
=> Connect schaltet die Booster wieder ein (Betriebs-
LED ein).
2. Kurzschluss oder eine Überlastung im Connect-6017-
Abschitt:
=> Nur Connect-6017 schaltet aus (Betriebs-LED aus).
Central Station bleibt eingeschaltet !
Zum Wiedereinschalten:
1. Ursache für den Kurzschluss/ Überlastung be-
seitigen.
2. „Stop“-Taste an der Central Station drücken.
3. „Go“-Taste an der Central Station drücken.
3. Mfx-Loks, die sich in dem Connect-6017-Bereich
befinden, haben keine Möglichkeiten Daten an die
Central Station zu senden. Daher ist dort keine
Umprogrammierung möglich.
Possibilities for Using the Connect-6017
- Suitable for connecting the 6015 or 6017 Booster to
layouts with the 60612 Central Station 60612 as the
central digital controller
- Only one Connect-6017 is required for several 6015 or
6017 Boosters.
Be sure to note the following:
- It is absolutely necessary
that rocker insulators
(C: 204 595, K: 385 580,
M: 385550) be installed
at the transition point
from a Booster-powered
area to an area powered
by Märklin Systems. Un-
der no circumstances or
operating situations must
an electrical connection
be allowed between the
center conductors for
these two neighboring
areas of a layout. Loco-
motives or cars with several pickup shoes connected in
parallel can therefore not be run over such a transition
point.
- If a mix of 6017 and 6015 Boosters are being used, then
the first Booster connected to the Connect-6017 must
be a 6017 Booster. Switch 3 on the coding switches for
this Booster must be set at “ON” (upper position).
K
M
C
385580
385550
204595
Summary of Contents for Connect-6017
Page 1: ...connect 6017 ...